Military Wire Partitions

WireCrafters military grade lockers and cages, Corp of Engineers Approved

WireCrafters Standard 840 Woven Wire Partitions

Woven Wire Mesh -
Thickness of Wire: 10 ga (.135)
Design: 2” x 1” Rectangular Woven Wire

Welded Frames -
Frame: 1-1/4” x 1-1/4” x 1/8” Angle
Fabrication: Mesh is securely welded to frame with flat steel stiffeners welded to frame behind mesh panels longer than 3’ 6”

Woven Wire Mesh Doors -
Frame: 1-1/4” x 1-1/4” x 1/8” Angle
Fabrication: Mesh is securely welded to frame with flat steel stiffeners welded to frame for extra strength where needed.

Upright Posts -
Material: 2” x 2” x 14ga. seamless square tubing
Fabrication: 1/4” x 2” x 7” plate welded at base of post

Hardware -
Material: 3/8” standard thread grade two plated for panel connections. Door hardware shall be 1/4” x 1” self drilling screws. 3/8” floor anchors and all other hardware furnished with each job.

Military Wire Partitions Finish -
Non plated parts shall receive one prime coat of gray enamel electrostatically applied.

Warranty Five (5) years. Consult specific warranty statement.

RapidWire WireCrafters Welded Wire Partitions

Welded Wire Panels : 8 and 10 gauge wires are welded at each intersection to provide mesh patterns of 1-1/4" x 3". 5/8" x3"or2" x2". Each panel is then framed utilizing 1-1/4"x 1-1/4"x 13 gauge roll formed angles. This unique design allows for the stacking of panels to the desired structure's height.

Upright Posts : 2"x 2" x 14 gauge seamless tubing is furnished with a 2"x 7"x 1/4' baseplate welded at its end.

Welded Wire Doors : Welded wire mesh consistent with the panel mesh is utilized to manufacture the Pre-Hung doors. Doors are of universal design and can be installed left or right hand.

Door Locks : All doors are furnished with a padlock hasp. Available as options are various lever / knob styles, coded entry push lever, panic bars, coded card readers, numerical key pads, magnetic style locks and electric strikes. Also available as an option is keyed alike locks, master keyed locks, Best™ cylinders less core and any 1 " mortised cylinder.

Hardware: All hardware needed for installation, including floor anchors, is furnished as standard.

Warranty Five (5) years. Consult specific warranty statement.

Finish: The RapidWire system undergoes a thorough finishing process which includes shot blasting to remove any scaly residue, painted with gray acrylic enamel. Optional colors available.