TA-50 Military Wire Mesh Gear Lockers

WireCrafters Woven and Welded Wire Storage Lockers

American Warehouse Systems and WireCrafters have teamed together to design and build the finest TA-50 Military Wire Mesh Gear Lockers on the market today. TA-50 Military Metal Storage Lockers are designed for the demanding requirements of the military and other government agencies. Our TA-50 Military Wire Mesh Gear Lockers are the preferred choose of government and military personnel because of their modern look, innovative design, heavy duty materials, and quality construction. These lockers are built to last. Quick to install and rock solid; there is no better choice than WireCrafters TA-50 Military Wire Mesh Gear Lockers.

WireCrafters TA-50 Military Wire Mesh Gear Lockers are the preferred brand of government and military personnel storage. We are proud to be the exclusive GSA contract holder for all WireCrafters products.

Advantages of our TA-50 Military Wire Mesh Gear Lockers

  • Heavy-duty storage of military and non-military equipment
  • Built to meet the highest military specifications
  • Tough, strong, durable, dependable  
  • Store gear and equipment with easy access
  • Secure storage with a variety of locking options
  • Provide ventilation for gear and equipment  

Military Metal Storage Lockers - Optional Items

  • Coat and duffle bag hang bars.
  • Fixed and folding shelves.
  • Helmet and equipment inspection hatches.
  • Sized to fit from floor to ceiling.
  • Attached ceilings available.
  • Alternate mesh.

WireCrafters TA-50 Military Gear Locker Features

  • Twenty standard sized wire panels
    4’ 0" or 5’ 0" high by 1’ 0" to 10’ 0" wide.
  • Stack two or more wire panels between posts to reach wall height.
  • Custom size wire panels and heights available.
  • Hinged, double hinged, bi-fold, and sliding gates available.
  • Sliding doors have patented tamper resistant latch mechanism.
  • Pad lock lug standard, key locks available.
  • Assembly hardware is inaccessible from the secured side of the partition.
  • Standard 3/8" mounting hardware is the heaviest in the industry.
  • Partition panels may be ordered with any mesh, expanded metal, sheet metal, or clear Lexan®.

Material Specifications

PANELS - Shall be 10-gauge steel wire crimped and woven in to 2" x 1" opening rectangular mesh, securely welded into a frame of 1-1/4" x 1-1/4" x 1/8" steel angle factory punched with 7/8" x 7/16" slotted holes to accept 3/8" mounting hardware. Panels four to six feet wide shall have one 1/4" x 3/4" flat stiffener; wider panels receive two 1/4" x 3/4" stiffeners. All panels shall be fastened to posts with 3/8" x 3" plated bolts and nuts.

DOORS - Hinged shall be constructed of the same materials as the panels with two 1/4" x 3/4" horizontal stiffeners across the width, and two diagonal 1/4" x 3/4" stiffeners from center to the corner. Hinged doors shall be equipped with padlock lugs (cylinder lock optional), three 4" x 4" spun pin hinges, and pick plate/slam bar assembly.

DOORS - Sliding shall be constructed of the same materials as the panels with two 1/4" x 3/4" horizontal stiffeners across the width, and two vertical 1/4" x 3/4" stiffeners from center to top or bottom. Sliding doors shall be equipped with two 4 wheel trolley trucks, 1-7/8" x 2-3/8" door track, pad lock lugs (cylinder lock optional), and door keeper assembly.

POSTS - Shall be made of 2" x 2" x 14 gauge steel tubing. Base plates of 2" x 7" x 1/4" steel flat with two 7/16" round holes for anchoring, shall be welded to each tube. Posts are factory drilled with 1/2" holes to accept hardware for mounting panels.

HARDWARE - Shall be 3/8" standard thread grade two plated nuts and bolts. Floor anchors are 3/8" wedge type-provided.

FINISH - Non-plated parts receive one coat of gray acrylic enamel. Touch up paint included with each shipment.