American Warehouse Systems
One Project - One Vendor™
WireCrafters Woven Wire Partitions Specifications

Woven Wire Specifications

Military Woven Wire Partitions

WireCrafters military grade lockers and cages, Corp of Engineers Approved

Buy Military Woven Wire Partitions!

WireCrafters Standard 840 Woven Wire Mesh Partitions

  • Woven Wire Mesh

    Thickness of Wire: 10 ga (.135)
    Design: 2" x 1" Rectangular Woven Wire

  • Woven Wire Mesh Panels

    Frame: 1-1/4" x 1-1/4" x 1/8" Angle
    Fabrication: Mesh is securely welded to frame with flat steel stiffeners welded to frame behind mesh panels longer than 3' 6"

  • Woven Wire Mesh Doors

    Frame: 1-1/4" x 1-1/4" x 1/8" Angle
    Fabrication: Mesh is securely welded to frame with flat steel stiffeners welded to frame for extra strength where needed.

  • Upright Posts

    Material: 2" x 2" x 14ga. square tubing
    Fabrication: 1/4" x 2" x 7" plate welded at base of post

  • Hardware

    Material: 3/8" standard thread grade two plated for panel connections. Door hardware shall be 1/4" x 1" self drilling screws. 3/8" floor anchors and all other hardware furnished as needed.

  • Military Wire Partitions Finish

    Nonplated parts shall receive one prime coat of gray alkyd enamel electrostatically applied. Product is finished for interior applications.

  • Warranty

    Five (5) years. Consult specific warranty statement.

 
American Warehouse Systems - The Top Material Handling vendor on GSA Schedule 56 in 2012 - Source MHEDA