Welded Wire Specifications
Military Welded Wire Partitions
WireCrafters military grade lockers and cages, Corp of Engineers Approved
WireCrafters Welded Wire Partitions
- Welded Wire Mesh
Thickness of Wire: 10 ga (.135)
Design: 2" x 2" Square Welded Wire
- Welded Wire Mesh Panels
Frame: 1-1/4" x 1-1/4" x 1/8" gauge roll form angle
Fabrication: Mesh is securely welded to frame with flat steel stiffeners welded to frame behind mesh panels longer than 3'-6".
- Welded Wire Mesh Doors
Frame: 1-1/4" x 1-1/4" x 13 gauge roll form angle
Fabrication: Mesh is securely welded to frame with flat steel stiffeners welded to frame for extra strength where needed.
- Upright Posts
Material: 2" x 2" x 14ga. square tubing
Fabrication: 1/4" x 2" x 7" plate welded at base of post
Material: Shall be 3/8" standard thread grade two plated for panel connections. Door hardware shall be 1/4" x 1" self drilling screws. 3/8" floor anchors and all other hardware furnished as needed.
- Military Wire Partitions Finish
Nonplated parts shall be powder coat gray. Product is finished for interior applications.
Five (5) years. Consult specific warranty statement.